[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: [AUDITORY] need roughness calculation results from different systems

Aures is the basis for Daniel&Weber. Both algorithms are described in detail in Acustica/acta acustica. The references are
Aures, W.: Ein Berechnungsverfahren der Rauhigkeit. Acustica 58, pp. 268-281
Daniel, P.; Weber, R.: Psychoacoustical Roughness: Implementation of an Optimized Model. Acustica 83, pp. 113-123
Both models are based on analysis of the modulation index in critical bandwith channels. Phase effects are taken into account by correlation between the channel signals. Both models are suffering from miscalculations for weak signals but are to my knowlegde the only algorithms outh there that are described in pretty much every detail of implementation. Apart from that, most comercially avaliable systems have roughness calculation implemented based on Aures' algorithm. So this calculation should have provided the best comparability between results of different systems.
This is where "correct implementation" comes into play. Aures and Daniel&Weber provided a lot of detail, which pedicts most of the model behaviour. Obviously there are differences in calculation output for the different model implementations. Also there are known differences in various implementation details, but due to similarity in model structure we believe that there should be a greater similarity between the results. The question that arises from that is: What ist the implementation, that correctly calculates what the authors intended.
Our proprietary model was developed to overcome the known problems of Aures and is conceptually pretty similar to Leman's SIM (which we didn't know of while developing the model). We're currently conducting experiments to support and tune our model.
The CF90 is a workstation for psychoacoustic measurements from the early 90's manufactured by Cortex Instruments. Cortex was bought by 01dB.
----- Ursprüngliche Mail ----
Von: PORRES <mentalosmosis@xxxxxxxxx>
An: Hannes Löschke <hannes_loeschke@xxxxxxxx>
Gesendet: Dienstag, den 24. Juli 2007, 19:05:39 Uhr
Betreff: Re: AW: AW: AW: [AUDITORY] need roughness calculation results from different systems

My model seems to go for another direction... it is based on plomp & Levelt's Results, Like Kameoka & Kurigawa, Like Hutchinson & Knopof, Like Sethares', Like Vassilakis', Like Barlow's... and some others maybe...

Wel... I haven't been able to study Aures' algorith yet, could you direct me to his documentations somewhere?

I know that like his... there are the work of Daniel & Weber! Which calculate roughness as a sum of the energy of the beating frequencies in auditory channels. But also similarly... Pressnitzer, . Pressnitzer uses a similar model but takes into account the effects of phase modulation in different auditory channels. Regarding phase and auitory channels, Leman uses a synchronization index model of sensory dissonance and roughness that accounts for the degree of phase-locking to a particular frequency that is present in the neural patterns.

The procedure of suming roughness values fro mauditory channels seem to be the same procedure after all for the ones based on Plomp & Levelt's result, because they define this curve of roughness value for a single auditory channel...

As I said, I wasn't able to study Aures and all the others that are similar, but I would like to check it out and compare the methodologies to mine.

Pressnitzer offers his model in puredata, check it at http://cognition.ens.fr/Audition/tools/realtime/

So, tell me sonething, what is the "Cortex CF90"? What do you mean by "correct implementation"? What is the model to be correctly implemented? what is your second step based at?And again... please direct me to the information of Aures' and the similar approaches that you are working on...


Hannes Löschke <hannes_loeschke@xxxxxxxx> wrote:
Our first step was to implement the pretty well documented Aures algorithm. Verfication against our Cortex CF90 revealed remakable differences, which lead to my request here on the list. Basically I'm now trying to figure out what the correct implementation is. Our results are pretty similar to the graphs calculated by the daniel&weber implementation found in PsySound3. Are there any other known implementations of this algorithm?
The second step will be the implementation of a second approach that is currently justified by hearing tests.
----- Ursprüngliche Mail ----
Von: PORRES <mentalosmosis@xxxxxxxxx>
An: Hannes Löschke <hannes_loeschke@xxxxxxxx>
Gesendet: Freitag, den 20. Juli 2007, 17:07:12 Uhr
Betreff: Re: AW: AW: [AUDITORY] need roughness calculation results from different systems

ok, so lets check each other's implementation against each other :)
I will check the file, I am curious on whar kind and method you are adopting.

Hannes Löschke <hannes_loeschke@xxxxxxxx> wrote:
Hi Alex,
I'm sorry I missed the last bit of your message. I'm currently checking our model implementation against other implementations and we're still compiling the data of our listening tests. So there isn't really any data to publish at this point.
Thanks for your support

----- Ursprüngliche Mail ----
Von: PORRES <mentalosmosis@xxxxxxxxx>
An: Hannes Löschke <hannes_loeschke@xxxxxxxx>; AUDITORY@xxxxxxxxxxxxxxx
Gesendet: Donnerstag, den 19. Juli 2007, 19:57:49 Uhr
Betreff: Re: AW: [AUDITORY] need roughness calculation results from different systems

hi hans, I dont know why I havent seen anything about this test file of yours...

I wrote to the list telling about my roughness model in puredata, did you read it? Anyway, send me this file of yours, I would like to test it on my system



Hannes Löschke <hannes_loeschke@xxxxxxxx> wrote:
Thank you all for giving me pointers to freely available packages and performing calculation on my test file. I still like to see some more output of commercial packages that are not available to everyone.
btw.: Yesterday I had a message on the topic being blocked by the spam filter. So everyone that sent me a message I haven't answered, please send that again.
Thank you all.

----- Ursprüngliche Mail ----
Von: Hannes Löschke <hannes_loeschke@xxxxxxxx>
An: AUDITORY@xxxxxxxxxxxxxxx
Gesendet: Dienstag, den 17. Juli 2007, 11:00:22 Uhr
Betreff: [AUDITORY] need roughness calculation results from different systems

Dear list,
we're currently researching on algorithms for roughness calculation. There are various models out there with different problems and behaviour. As our ressources are limited we can't gain access to all possible systems, so I'm asking you to help me out.
I need the roughness vs. time and specific roughness vs. time plots from as many different systems as possible. I have prepared a test file and will send it to everyone willing to help me out. The file is 10sek. long, sampled at 48kHz/16bit/mono.
Thank you
Hannes Löschke
Institut für Musikinstrumentenbau
Klingenthaler Straße 42
08267 Zwota

Was ist Glück? Schlafen Fische überhaupt? Die Antworten gibt?s auf Yahoo! Clever.

Die etwas anderen Infos rund um das Thema Reisen. BE A BETTER WELTENBUMMLER!

Choose the right car based on your needs. Check out Yahoo! Autos new Car Finder tool.

Heute schon einen Blick in die Zukunft von E-Mails wagen? Versuchen Sie´s mit dem neuen Yahoo! Mail.

Got a little couch potato?
Check out fun summer activities for kids.

Beginnen Sie den Tag mit den neuesten Nachrichten. Machen Sie Yahoo! zu Ihrer Startseite!

Ready for the edge of your seat? Check out tonight's top picks on Yahoo! TV.

Heute schon einen Blick in die Zukunft von E-Mails wagen? Versuchen Sie´s mit dem neuen Yahoo! Mail.

Heute schon einen Blick in die Zukunft von E-Mails wagen? Versuchen Sie´s mit dem neuen Yahoo! Mail.