Re: Audio Time and/or Level Alignment Algorithm (Junyong You )


Subject: Re: Audio Time and/or Level Alignment Algorithm
From:    Junyong You  <junyong.you@xxxxxxxx>
Date:    Thu, 3 Jul 2008 14:06:21 +0300
List-Archive:<http://lists.mcgill.ca/scripts/wa.exe?LIST=AUDITORY>

Hi Dan and All, Thanks for Dan's suggestion. Actually, I have also tried to use mutual information, however, I found these methods are not available for all audio signals, for example, one method is effective for to speech, but it maybe disabled for music. In addition, the delay maybe time-varying, so I didn't find a reliable estimation method to compute the time delay. Thanks a lot. BR, Junyong ----- Original Message ----- From: "Dan Stowell" <dan.stowell@xxxxxxxx> To: <AUDITORY@xxxxxxxx> Sent: Thursday, July 03, 2008 1:52 PM Subject: Re: [AUDITORY] Audio Time and/or Level Alignment Algorithm > Hi - > > You might like to consider using mutual information as an alternative to > cross-correlation. The advantage is that cross-correlation is always about > the linear dependencies between the signals, whereas the mutual > information can also highlight nonlinear dependencies (for example, in > your case, the codec may have added compression). > > Dan > > > > Junyong You wrote: >> Hi John and all, >> >> In fact, I am also looking for the time alignment of two samples, one is >> the original, and another is decoded. My problem is to estimate the time >> delay caused by audio coding. >> >> I try a classifical estimation method, which makes use of envelope based >> cross-correlation function. That means, the envelopes of two samples are >> computed firstly, and then calculate the cross correlation function of >> these two envelopes, and then select the time length corresponding to the >> maximal correlation as the delay. >> >> I hope this method will help you, and if anyone has better approaches, >> please let me know, thank you very much. >> >> BR, Junyong You >> >> TUT, Finland >> ----- Original Message ----- >> From: John Spencer To: AUDITORY@xxxxxxxx Sent: Wednesday, July >> 02, 2008 2:11 PM >> Subject: [AUDITORY] Audio Time and/or Level Alignment Algorithm >> >> >> >> Hello List, >> >> >> >> I am looking for advice and help with a problem. >> >> >> >> I have 2 audio signals each recorded in different environments but both >> are the same length. I need to align them the best I can or align at >> leats one of them to match the other. They need to be aligned time wise >> and level wise if possible. Any advice appreciated, thanks. >> >> >> >> John >> Spencer ------------------------------------------------------------------------------ >> >> Walla! Mail - Get your free unlimited mail today > > > -- > Dan Stowell > Centre for Digital Music > Queen Mary, University of London > Mile End Road, London E1 4NS > http://www.elec.qmul.ac.uk/department/staff/research/dans.htm > http://www.mcld.co.uk/ >


This message came from the mail archive
http://www.auditory.org/postings/2008/
maintained by:
DAn Ellis <dpwe@ee.columbia.edu>
Electrical Engineering Dept., Columbia University